Most Accurate Way to Install Windows 10 on Your PC

You can install Windows 10 on your device very easily. There are many ways in which you can download Windows 10. However, precise knowledge of the technical details involved is required. Here we have prepared a short guide from Microsoft to help you install Windows 10.

You can easily start installing Windows 10 from scratch or by upgrading your previous operating system to Windows 10. But before starting the installation process, let’s do some preparatory steps to install Windows 10 on your system easier.

Let’s start:

Back up your data:

Data can be backed up in many ways, one of which is using any cloud storage service platform, such as a OneDrive folder. The OneDrive cloud storage platform will sync your documents, photos, and desktop using the steps below:

1. Select OneDrive Cloud option from taskbar
2. Select More from the menu
3. From there, go to Settings
4. Click Backup
5. Now tap on the option Manage Backup
6. Select the folder and data you want to recover
7. Click Start Backup

Or you can use an external drive to copy data by following the steps below:

1. Go to File Explorer
2. Click This PC in the menu on the left
3. Browse tracking; C:\Users
4. Right click on the folder of your choice and click Copy

Once you’ve completed the methods below, follow the onscreen instructions to create a backup.

System Requirements for Windows 10:

If you are tired of trying to install Windows 10 but your efforts are still unsuccessful, it is likely that the current version of Windows 10 is not compatible with your system hardware. If you have previously used an earlier version of Windows such as Windows XP, Windows Vista, Windows 7, or Windows 8.1, check the minimum system requirements:

• Processor: 1 GHz or System on Chip (SoC)
• Memory: 1 GB for 32-bit or 2 GB for 64-bit
• Storage: 32 GB for 64-bit or 32-bit
• Graphics card: DirectX 9 or higher with 1.0 . WDDM driver
• Screen: 800×600

Ways to install Windows 10 on a computer:

Upgrade Windows 7 or 8 to Windows 10:

In case you are upgrading to Windows 10 from Windows 7, 8 or earlier, you may not need to re-enter the product key to complete the setup. All you need is a stable internet connection and Windows 10 will automatically activate after the update.

• Go to Settings
• Click Update and Security
• Click Activate
• In the “Windows” section, make sure your computer is activated.

After confirming this, you need to follow a series of steps that may allow you to convert Windows 7 or 8 to Windows 10. See:

1. First, open your browser and go to https://www.microsoft.com/en-us/software-download/windows10
2. Click the “Download the tool now” option under “Create Windows 10 installation media”
3. Select “Run” and for this you must have an administrator account
4. Now on “License terms” page click “I accept”
5. On the next screen called “What do you want to do?”, select Upgrade this PC now, and then select Next.
6. After downloading and installing the tool, you will see Windows 10 installed on the screen.

Important Note: If you do not have a license for Windows 10, you can purchase a copy of it at https://www.microsoft.com/en-us/windows/get-windows-10. On the other hand, if you’re trying to upgrade Windows 10, you don’t need to enter a product key.

• Once the installation begins, you’ll see a summary of all the options you’ve selected. Select “Change what to keep” if you want to change anything and choose whether you want to keep your apps and personal files, keep only personal files, or choose not to keep anything in upgrade process.
• Click Save and close all apps and files, then click Settings.
• Please wait as this process takes time to complete and your system will reboot many times.
• Click Install
• Do not turn off the computer.

Clean install Windows 10:

A clean install is a more stable option than upgrading your old operating system. However, it removes everything. When reinstalling Windows 10 from scratch, the system will be restored and all data on the hard drive will be erased. Therefore, it is necessary to back up the entire range of data so that you can prevent data loss.

Although it erases every bit of data, it is the best option to avoid driver problems and incompatibilities. So, to eliminate these risks, it is best to start the Windows 10 installation process completely.

Now let’s talk about setting the correct boot order:

Before starting to install Windows 10 on your system using USB bootable media, you need to configure Basic Input/Output System (BIOS) and Unified Extensible Firmware Interface (UEFI) ) to adjust the boot order accordingly.

To change the BIOS boot order you need to follow the method provided here:

1. Turn on your device.
2. Press one of the function keys (F1, F2, F3, F10 or F12), the ESC key, or the Delete key during startup.
3. Also, open Boot Settings in BIOS,
4. Now set the boot order to run Windows 10 installation files using USB media.
5. Click Save to apply the changes.

Once you complete the steps, the media files from the bootable USB will boot.

Change boot order using UEFI:

Follow these steps to open the UEFI environment:

1. Go setting
2. Open Update and security
3. Click The recuperation
4. Now, under “Advanced Startup”, click Restart Now
5. Click Resovle problem
6. Select Advanced Options
7. Select Install UEFI Firmware
8. Press Restart
9. Now open the boot settings from the firmware
10. Set the boot order to start the installation files from the USB media.
11. Click to save”

Once you have completed the steps, your UEFI based system should now be able to boot from USB.

Access UEFI on Windows 8.1:

Use the steps below to access the UEFI environment to boot your device:

1. Go to Settings
2. Select Update and restore
3. Press recovery
4. Now under “Advanced Startup” click “Restart”.
5. Click Troubleshoot
6. Tap Advanced Options
7. Select Install UEFI Firmware
8. Press Restart
9. Now in Firmware click on Startup Settings
10. Select Boot Order to start the installation from USB media
11. Finally, save the changes

The next important thing that you need to do before you start a clean install of Windows 10 is that you need to disconnect the unnecessary peripherals attached to your device.

Disconnect unnecessary peripherals

Peripheral devices connected to your device may interrupt the installation process. It is important to disconnect peripherals that are not in use, such as removable storage, USB or Bluetooth, printers, cameras, scanners, etc. For simple installation, all these All you need is a monitor, keyboard, mouse and a stable internet connection.

How to create a bootable USB media for a clean install:

While performing a clean install of Windows 10, you need to prepare a USB drive bootable media first. You can use the media creation tool from the official Microsoft website. Simply go to https://www.microsoft.com/en-us/software-download/windows10, click Download Now, and follow the onscreen instructions to install the tool.

Start a clean install of Windows 10:

Once you have prepared the bootable media to install Windows, you need to follow the steps below to complete the process:

1. Connect to bootable media
2. Now click any button to launch media
3. Click “Next” in Windows settings
4. Click Install Now
5. Now specify the product key if you are installing Windows for the first time. If you’re reinstalling, click I don’t have a product key to continue
6. Click next
7. Choose your version of Windows 10
8. Click Next
9. Select I accept the license terms
10. Click Next
11. Select the Custom option: Install Windows only (Advanced).
12. Select the Windows installation partition and press Delete
13. Click Yes
14. Choose an empty drive
15. Click Next

Once the Windows 10m installation is complete, the setup will automatically start in Windows 10 on your system.

What to do after installing Windows 10:

Once installed, the following is required to activate Windows 10. To check the activation, follow the steps provided here;

1. Go to your System Settings
2. Click Update and Security
3. Press activate
4. After Windows 10 is successfully installed, you will receive one of the following messages:

• “Windows is activated with a digital license: The installation has been activated, but the license is not linked to your Microsoft account.”
• “Windows is activated with a digital license associated with your Microsoft account: The installation is activated and the license is linked to your Microsoft account.”

Now you need to check for updates:

1. Go to Settings
2. Click Update and Security
3. Select Windows Update
4. Click Check for Updates

Next is to check your device drivers with these steps:

1. Click Start
2. Search for Device Manager and click on the first option
3. Make sure that no options are marked with yellow and red and that no options are marked as unknown

Important Tip: Make sure you have the latest drivers installed for your device to ensure a smooth Windows 10 experience.

Categories: How to
Source: newstars.edu.vn